Aluminum Sheet & Plate


Aluminum in its various forms is stocked in a range of strengths varying from that of Specification 1100-0 (which has a yield strength of around 5000 lbs. per square inch) to that of Specification 7075-T6 (yield strength of about 70,000 lbs. per square inch).

Here are a few typical applications within the range of these specifications –

Utility Sheet, is used for all general sheet metal work such as flashings, ductwork, lining walls, etc.

1100-0 is used primarily for spinning and deep drawing operations such as utensils, ornaments, etc.

1100-H14 and 3003-H14 are specification alloys used for general forming operations.

5005-H14 similar in physical characteristics to 3003-H14 with superior corrosion resistance and a homogenous smooth surface finish suitable for anodizing. This alloy is suitable for curtain walls, decorative trim, control panel boxes and signs, etc.

5052-H32 and H34 is a superior strength alloy of good forming qualities and is especially suited for Marine applications.

5083-H321 and H323 is one alloy of different tempers that produces high weld joint efficiencies. It is used for tank work, heavy transport, etc., where its welded properties can be used to advantage

5454-H32 is a sister alloy to 5083 with a lower rating to stress corrosion when functioning in the 150°F to 300°F range. Typical uses are truck dump bodies, tanker trucks, exhaust stacks, chemical handling tanks on vessels, etc.

6061-T6 is an excellent all purpose alloy, having high strength and good corrosion resistance. It is used for all structural applications such as mine cars, logging chutes, and ship construction.

Painted Aluminum: 1100, 3003, 3105, 5005 and 5052 are just some of common alloys available in painted product. Painted aluminum is produced in a broad range of mechanical properties and the spectrum of finishes includes high durability exterior coatings, specialized epoxies, polyesters, textured polyesters, fluorocarbons and metallics as well as wash coat primers. Standard colours can be selected from or custom colour matching can be done to specification. Most coatings are available on one and two sides.

ALUMINUM UTILITY SHEET Plain Finish – Rectangular

Utility Sheet is a general purpose aluminum sheet and is particularly recducts, and general sheet metal work

Thickness Inches Size Inches Weight per Sq. Ft. Lbs. Est. Weight per Sheet Lbs.
0.016 36 x 96 0.224 5.1
0.02 36 x 96–48 x 96 0.282 6.8–9.0
0.025 36 x 96–48 x 144 0.352 8.5–16.9
0.032 36 x 96–48 x 144 0.451 10.8–21.6
0.04 36 x 96–48 x 144 0.563 13.5–27.0
0.051 36 x 96–48 x 144 0.718 17.0–34.5
0.064 36 x 96–60 x 120 0.901 21.6–45.0
0.081 36 x 96–60 x 120 1.141 27.4–57.0
0.102 36 x 96–60 x 120 1.436 34.5–71.8
0.125 36 x 96–60 x 144 1.762 42.3–105.7
0.187 48 x 96–60 x 120 2.641 84.5–126.8

ALUMINUM UTILITY SHEET – Rectangular Stucco Pattern

Thickness Inches Size Inches Weight per Sq. Ft. Lbs. Est. Weight per Sheet Lbs.
0.025 36 x 96–48 x 96 0.352 8.5–11.3
0.032 36 x 96–48 x 144 0.451 10.8–21.6
0.04 36 x 96–48 x 144 0.563 13.5–27.0
0.051 36 x 96–48 x 144 0.718 23.0–34.5
0.064 48 x 96–48 x 144 0.901 28.9–43.0

ALUMINUM UTILITY PLATE

Thickness Inches Size Inches Weight per Sq. Ft. Lbs. Est. Weight per Sheet Lbs.
0.25 48 x 96–48 x 144 3.521 112.7–169

ALUMINUM SHEET 1100.0 Mill Finish

This is 99% minimum purity aluminum noted for excellent resistance to corrosion; for easy workability including deep drawing; for weldability and high thermal conductivity. Also used for spinning requirements.

Thickness Inches Size Inches Weight per Sq. Ft. Lbs. Est. Weight per Sheet Lbs.
0.032 48 x 96 0.452 14.46
0.040 48 x 96 0.565 18.08
0.051 48 x 96 0.706 22.59
0.064 48 x 96 0.889 28.45
0.081 48 x 96 1.13 36.16

ALUMINUM 1100-0 Circles

Thickness Inches Size Inches Weight per Sq. Ft. Lbs. Est. Weight per Sheet Lbs.
0.040 x 7" dia–x 12" dia -– .1520 lbs. each–.4468 lbs. each
0.050 x 14" dia - .7668 lbs. each
0.064 x 12" dia–x 18" dia -– .7108 lbs. each–1.5990 lbs. each

ALUMINUM SHEET 1100 – H14 Mill Finish

This is 99% minimum purity aluminum noted for excellent resistance to corrosion; for easy workability and weldability. Suitable for sheet metal work, decorative and architectural uses. (Also available in anodizing quality. Coils are stocked in gauges under 1/8″)

Thickness Inches Size Inches Weight per Sq. Ft. Lbs. Est. Weight per Sheet Lbs.
0.025 48 x 144 0.353 16.94
0.032 48 x 96–48 x 144 0.452 14.43–21.7
0.04 48 x 96–48 x 120 0.563 18.08–22.6
0.051 48 x 96–48 x 120 0.719 22.59–28.24
0.064 48 x 96–48 x 144 0.901 28.45–42.67
0.081 48 x 96–48 x 144 1.129 36.128–54.19
0.125 36 x 96–48 x 144 1.764 42.34–84.67

ALUMINUM PLATE 5454-H32 Mill Finish

(Can shear aluminum sheets to any required size.)

Thickness Inches Size Inches Weight per Sq. Ft. Lbs. Est. Weight per Sheet Lbs.
1/4 60 x 120–84 x 240 3.521 176.0–492.9

ALUMINUM SHEET 5454 – H32 Mill Finish

A non heat treatable alloy of medium strength and with high corrosion resistance in marine applications. As welded properties superior to 5052. Used for storage tanks, highway tankers and unfired pressure vessels.

Thickness Inches Size Inches Weight per Sq. Ft. Lbs. Est. Weight per Sheet Lbs.
0.128 60 x 192 1.802 144.0
0.187 60 x 144–84 x 240 2.641 158.4–369.7

ALUMINUM SHEET 5454-0 Mill Finish

Thickness Inches Size Inches Weight per Sq. Ft. Lbs. Est. Weight per Sheet Lbs.
0.187 72 x 108–96 x 112 2.641 142.6–197.2

ALUMINUM PLATE 5083 – H116 Mill Finish

An alloy with superior tensile strength and welded properties. Used for heavy structural applications such as dump trucks and rock bodies, railway rolling stock and ship building. (5083-H321 Should not be used for marine applications.)

Thickness Inches Size Inches Weight per Sq. Ft. Lbs. Est. Weight per Sheet Lbs.
1/4 48 x 192–96 x 240 3.521 237–563.4
5/16 60 x 192–96 x 240 4.409 352.7–705.4
3/8 60 x 192–96 x 240 5.291 423.3–846.6
1/2 60 x 192–96 x 192 7.048 564.8–902
5/8 60 x 192 8.82 706
3/4 60 x 192 10.580 848
1 60 x 192 13.824 1106.0

ALUMINUM SHEET 5005-H14 Anodizing Quality Sheet Mill Finish Rectangular

5005-H34 is an alloy developed to anodize with a uniform surface finish. Material is packed in 2000 lbs. skids all paper interleaved to avoid surface scratching.

Thickness Inches Size Inches Weight per Sq. Ft. Lbs. Est. Weight per Sheet Lbs.
0.032 48 x 120 0.451 18.04
0.040 48 x 120 0.565 22.60
0.050 48 x 120 0.706 28.24
0.064 48 x 120 0.904 36.16
0.080 48 x 120 1.130 45.20
0.125 48 x 120 1.750 70.00

ALUMINUM SHEET 5052-H32 Mill Finish

Thickness Inches Size Inches Weight per Sq. Ft. Lbs. Est. Weight per Sheet Lbs.
0.032 36 x 196 0.454 10.80
0.04 48 x 196–48 x 144 0.563 18.00–27.00
0.051 36 x 196–48 x 196 0.718 17.20–23.00
0.064 36 x 196–48 x 144 0.901 21.60–43.20
0.081 48 x 196–48 x 144 1.141 36.5–54.8
0.091 48 x 196–60 x 144 1.282 41.00–76.90
0.125 36 x 196–48 x 192 1.762 42.30–112.8
0.1875 48 x 196–48 x 144 2.641 84.51–126.8

ALUMINUM SHEET 5052-H32 Plate

Thickness Inches Size Inches Weight per Sq. Ft. Lbs. Est. Weight per Sheet Lbs.
0.25 48 x Coil–60 x 120 3.521 -–176
0.375 48 x 196–48 x 144 5.291 169.3–253.9
0.5 48 x 196–48 x 144 7.048 225.5–338.3

ALUMINUM SHEET 5052 – H34 Mill Finish

(“O”, “H36” & “H38” tempers also available in mill run quantities.)

Thickness Inches Size Inches Weight per Sq. Ft. Lbs. Est. Weight per Sheet Lbs.
0.032 48 x 196–48 x 120 0.451 14.4–18.0
0.04 48 x 196–48 x 120 0.563 18.0–22.5
0.051 48 x 196–48 x 120 0.718 23.0–28.7
0.064 48 x 196–48 x 144 0.901 28.9–43.0
0.081 48 x 196–48 x 144 1.141 36.5–54.8
0.091 48 x 196–48 x 144 1.282 41.0–61.5
0.125 48 x 196–48 x 144 1.762 56.4–84.6
0.187 48 x 196–48 x 144 2.641 84.5–126.8

ALUMINUM SHEET 6061 – T6 Mill Finish TO QQA-250/11

Thickness Inches Size Inches Weight per Sq. Ft. Lbs. Est. Weight per Sheet Lbs.
0.04 48 x 144 0.563 27
0.051 48 x 196–48 x 144 0.718 23–34.5
0.064 48 x 196–48 x 144 0.901 28.9–43
0.081 48 x 196 1.141 36.5
0.125 36 x 196–60 x 192 1.762 42.3–141.0
0.187 36 x 196–60 x 192 2.641 63.4–211.3

ALUMINUM PLATE 6061 – T651 Mill Finish TO QQA-250/11

*In some cases manufacturers supply above plates 1/2″ extra on width and length for cutting. Because of this weights could vary slightly.
** Now available in thickness up to 12″ on mil run quantities

Thickness Inches Size Inches Weight per Sq. Ft. Lbs. Est. Weight per Sheet Lbs.
1/4 48 x 96–72 x 144 3.521 112.6–253.5
5/16 48 x 144–60 x 192 4.409 212.0–352.7
3/8 48 x 96–60 x 192 5.291 169.3–423.2
1/2 48 x 96–60 x 192 7.048 225.9–564.8
5/8 48 x 96–60 x 192 8.82 282.2–705.6
3/4 48 x 96–48 x 144 10.60 338.6–508.8
1 48 x 144 14.10 677.0
1 1/4 48 x 144 17.62 847.0
1 1/2 48 x 144 21.15 1016.0
2 48 x 144 28.20 1355.0
2 1/2 48 x 144 35.30 1694.4
3 48 x 144 42.30 2030.0
3 1/2 48 x 144 49.40 2369.0
4 48 x 144 56.40 2707.0
5 48 x 144 70.56 3387.0
6 48 x 144 84.67 4064.0

ALUMINUM 6061 – T6511 AQ-A-200/8.ASTM B-221

Description Weight per Ft. Lbs.
3/8 x 8–x 12 x 12 ft. 3.528–5.292
1/2 x 8–x 10 x 12 ft.–x 12 ft. 6" 4.704–5.880
3/4 x 8–x 10 x 12 ft. 7.056–8.820
1 x 8–x 12 x 12 ft. 9.408–14.112
1 1/4 x 10–x 12 x 12 ft. 6"–x 12 ft. 14.700–21.000
1 1/2 x 12 x 12 ft. 4" 21.168
1 3/4 x 10 x 12 ft. 6" 20.580
2 x 14 x 12 ft. 33.600

Locations offering this product: